Siemens

Power supply unit

SITOP Modular series

PSU8600

Regulated AC/DC power supply unit (SMPS PSU)

Ethernet/PROFINET interface for TIA integration
4 x output channels

320-575Vac (380Vac / 400Vac / 415Vac / 480Vac) (47...63Hz)
(derating when supply voltage is 320...360Vac and 530...575Vac)

3-color LED (operating state)
LED (manual/remote operating mode)
4 LEDs (for PROFINET communication)
3-color LED per output (operating state)
Green LED (parallel operation Output 1 and 2 / 3 and 4)

3-phase (3AC) input

40A (4 x 10A)
60A (5s every minute)

960W (4 x 240W)

4...28Vdc (5Vdc / 6Vdc / 12Vdc / 24Vdc nom.)

15ms (400Vac input) - possibility to prioritize output 1 (with DIP switch)

Screw-clamp term. connections

Output overvoltage protection (<35V)
Electronic overload cut-off
Possible electronic short-circuit protection (constant current) on output 4 (setup via DIP switch)

93%

Ethernet
PROFINET

125 mm

DIN rail (35x15)

1 x digital output (NO Normally Open contact) (DC output OK remote signalling)

IP20

W125mm x H125mm x D150mm

-25...+60 °C

-40...+85 °C

85044090

Commercialized

SITOP PSU8600/3AC/24VDC/40A/4X10A PN
6EP34378MB002CY0

4025515154471

(UNSPSC 15) 39-12-10-04
(UNSPSC 14) 39-12-10-04

887621873059

SEMI F47
CE marking
cULus-Listed (UL 508; CSA C22.2 No. 107.1); file E197259
cCSAus (CSA C22.2 No. 60950-1; UL 60950-1)
DNV GL (Germanischer Lloyd's)
ABS
EN 55022 Class B (Emitted interference)
EN 61000-3-2 (Supply harmonics limitation)
EN 61000-6-2 (Noise immunity)

The three-phase basic units of the SITOP PSU8600 power supply system accommodate within their extremely compact width an Ethernet/PROFINET interface as well as four individually parameterizable outputs (voltage and current threshold) with selective monitoring.
Without wiring overhead; further modules from the modular system can be added to expand the number of outputs (CNX8600); to increase the mains buffering time (BUF8600); or to buffer longer power failures (UPS8600 with BAT8600) according to requirements.
Comprehensive diagnostic and maintenance information is available via PROFINET. It can be evaluated directly in SIMATIC S7 and visualized in SIMATIC WinCC.
Energy management is also optimally supported by collecting the energy data for each output as well as individual activation and deactivation of the outputs via PROFIenergy.
The integrated OPC UA server also allows direct integration into automation applications with OPC UA clients made by different manufacturers; e.g. of controllers or PCs. Not only the parameter assignment but also the diagnostics of the power supply system are possible via the open interface.
Three-phase wide-range input 400 to 500V 3 AC for global use
Extremely slim design with very high efficiency of up to 94%
Versions with a configurable output with up to 20A or 40A and selective monitoring.
Versions with four integrated; individually configured outputs with up to 5A or 10A each and selective monitoring
Voltage and response threshold can be set separately and are infinitely adjustable for each output
Extra power with 1.5 times the rated current (5 s/min) for brief functional overload
Integrated Ethernet/PROFINET interface (2 ports)
Easy configuration in the TIA Portal
Comprehensive diagnostic information during operation
Outputs can be deactivated and activated selectively via PROFIenergy
Individual expansion options from the modular system (CNX8600 expansion modules; BUF8600 buffer modules; or UPS8600 with BAT8600 for buffering longer power failures) without wiring overhead

Austria

100mVpp max.

207 612 hours

1s start-up time