Siemens

Power supply unit

SITOP Standard series

PSU6200

Regulated AC/DC power supply unit (SMPS PSU)

85-264Vac (120Vac / 220Vac / 230Vac / 240Vac nom.) (47...63Hz)

85-275Vdc (110Vdc / 220Vdc nom.)

Green LED (DC output OK)

Single-phase (1AC) input
DC input

10A
15A (5s every minute)

240W

24Vdc-28Vdc

45ms (at 230Vac input)

Spring-loaded term. connections

Output overvoltage protection (<32V)
5A built-in incoming fuse
Overshoot of Vout < 2%
Short-circuit shutdown and periodic restart attempts (reclosing)

92%

45 mm

DIN rail (35x7.5 / 35x15)

1 x digital output (electronic NO Normally Open contact) (DC output OK remote signalling)

IP20

W45mm x H135mm x D125mm

-25...+70 °C

-40...+85 °C

85044090

Commercialized

SITOP PSU6200/1AC/24VDC/10A
6EP33347SB003AX0

4025515155188

(UNSPSC 15) 39-12-10-04
(UNSPSC 15) 39-12-10-04

804766817052

SEMI F47
CE marking
cULus-Listed (UL 508; CSA C22.2 No. 107.1); file E197259
cCSAus (CSA C22.2 No. 60950-1; UL 60950-1)
DNV GL (Germanischer Lloyd's)
ABS
EN 55022 Class B (Emitted interference)
EN 61000-3-2 (Supply harmonics limitation)
EN 61000-6-2 (Noise immunity)

High performance - Focused diagnostics - The all-round power supply for a wide variety of applications
The SITOP PSU6200 product family is the new standard power supply for customers with extreme technical requirements regarding reliability; efficiency and integration.
It is suitable for many fields of application; particularly in the industrial environment; such as series machine building.
The SITOP PSU6200 represents the state-of-the-art and takes the prized SITOP design to new dimensions of efficiency.
The stabilized 1-phase power supplies with a wide input range of 120-230Vac nominal voltage and 120-240Vdc are available with an output voltage of 12V in three performance classes and with an output voltage of 24V in six performance classes.
The premium design of the PSU6200 series; in connection with the push-in terminals; represents effective wiring.
The modules in this product family are all-rounders featuring a long service life and absolute reliability.
The high level of efficiency across the entire load range; as well as the minimal no-load losses; result in lower overall energy consumption.
New levels of convenience during commissioning and service are offered for modules of 10A or more by the diagnostic monitor with LED indicators for DC o.k.; utilization and service life; as well as the diagnostics interface for reporting status information.
For power supplies with an output of more than 10A the DC o.k. status is also equipped with glitch recognition that indicates even the smallest supply voltage failures.
For power supply modules up to 10A; a diagnostics LED indicates DC o.k.; this information is also reported by means of a relay for devices of 3.7A and above.
Diagnostic monitor from 10A output performance
LED display for DC o.k.; utilization and operating hours
Diagnostics interface from 10A output performance
Provision of important operating parameters (e.g. power; voltage; overload; etc.)
Constant current
Up to 15V supply voltage for 24V devices; up to 9V supply voltage for 12V devices
Power supply not switched off immediately in the event of overload
Robust AC input
Active PFC
Optimized protection of the input circuit
DC capability / wide-range input
Enhanced versatility and reliability
Coordinated product family
Comprehensive range of products for a wide range of requirements
Narrow overall width
For direct side-by-side mounting without lateral clearance requirements
Attractive metal enclosures from 3.7 A; plastic enclosure up to 2.5A with similar form and color
Push-in terminals
Easy; time-saving installation without need for tools
Separate ground terminal
Redundancy modules
Narrow width
In SITOP PSU6200 design

Austria

30mVpp max.
20mVpp typ.

500ms start-up time