Siemens

Power supply unit

LOGO! Power

Regulated AC/DC power supply unit (SMPS PSU) for P.L.C.

85-264Vac (120Vac / 220Vac / 230Vac / 240Vac nom.) (47...63Hz)

110Vdc-300Vdc

Green LED (DC output OK)

Single-phase (1AC) input
DC input

2.5A
3A (5s every minute)

60W

22.2-26.4Vdc (24Vdc nom.)

40ms (at 187Vac input)

Screw-clamp term. connections

Overvoltage protection (as per EN 60950-1)
Built-in incoming fuse
Electronic short-circuit protection (constant current)

90%

DIN rail (35x7.5 / 35x15) / wall

500ms start-up time

IP20

W54mm x H90mm x D53mm

90 mm

54 mm

53 mm

-25...+70 °C

-40...+85 °C

LED indicator

85044090

7 W

Commercialized

LOGO!Power/1AC/24VDC/2.5A
6EP33326SB000AY0

6EP1332-1SH43

4025515154853

804766420399

(UNSPSC 15) 39-12-10-04
(UNSPSC 15) 39-12-10-04

NEC class 2
SEMI F47
CE marking
cULus-Listed (UL 508; CSA C22.2 No. 107.1); file E197259
cURus-Recognized (UL 60950; CSA C22.2 No. 60950); File E151273
NEC class 2 (acc. to UL 1310)
FM approval Class I Div. 2 Group ABCD T4
BV
DNV GL (Germanischer Lloyd's)
ABS
LRS
NEC Class 2 (as per UL1310)
EN 55022 Class B (Emitted interference)
EN 61000-6-2 (Noise immunity)

Our new miniature power supply units in the same design as the logic modules offer great performance in the smallest of spaces
Efficiency has been improved across the entire load range; and the low power losses in no-load operation ensure efficient operation.
The wide-range input for single-phase networks as well as operation with direct voltage; the wide operating temperature range; comprehensive certifications as well as the power reserve when switching on capacitive loads makes them suitable for universal use.
These reliable power supplies with their flat; stepped profile can be used extremely flexibly in numerous applications such as in distribution boards; for example.
To further increase 24V availability; the LOGO!Power power supply units can be combined with DC-UPS; redundancy and selectivity modules
Single-phase wide range input from 85V to 264Vac and 110V to 300Vdc
Low width from a minimum of 18mmto a maximum of 72mmsaves space in the control cabinet
Higher efficiency level up to 90% over the entire power range and ERP-compliant no-load losses of < 0.3W
Flexible mounting with standard rail or wall mounting in different installation positions
Load monitoring due to real-time measurement of the output current without disconnecting the cable i.e. without interrupting the DC supply
Reliable thanks to assured connection of heavy loads when starting up as well as constant current in the event of overload
Wide temperature range from -25 °C to +70 °C
Extensive certification such as cULus / CB / FM / ATEX / cCSAus Class I Div. 2 / GL / ABS

Austria

200mVpp max.
30mVpp typ.

Screw-clamp

2 864 520 hours